Forum Calcionapoli

The ceiling of the space under the floor is usually defective or gypsum board attached to the underside of the beams. Plasterboard is a plaster “skimming” Finish .

Solid Ground Floor

The diameter of a solid floor made of several layers of different materials.

The first layer is 100 to 150 of the consolidated hardcore crushed stone and broken bricks clean. The level of each bump in the road caused by the excavation and a flat surface for the floor to offer.

A 50mm thick layer of fine ashes, sand or low betonmix is defined on the hardcore on the surface. This Blinding also smooth, flat surface to put the waterproof membrane. The moisture barrier should never be placed directly on hardcore – can pierce timber floors perth.

The impermeable membrane may be placed above or tossous the floor slab. In the latter case, the DPM is the word free moisture. Wila variety of materials are suitable as DPMS: hot and cold asphalt poured asphalt, pitch and epoxy compounds polyethylene film of 1000 meters.

The slab (concrete) can vary in thickness from 100 to 150mm and one or two layers of wire mesh, depending on the soil surface and the intended use. The concrete slab is a cap placed on the surface, depending on the type of flooring is used.

To provide additional insulation, 50mm polystyrene sheets can be added between the plate and the substrate.